How To Change A Watch Battery Without Tools. Then gently apply pressure on the tool, pushing lightly away from the watch. Give the screwdriver or knife a slight twist.
It’ll usually be a shiny metallic color, with a diameter somewhere between 6 and 9.5 millimeters. Change a watch battery without tools easily. The battery number is on the side that is sticking out when.
If It’s Dirty, You Should Clean It, Too.
Take a look at the battery and take in note the serial number. Instructions for using the watch works tool kit to change a watch battery to change a battery in an electronic watch you must first determine the type of watch case back with which your watch is fitted. 3# take off the battery.
The Back Should Easily Snap Back Into Place.
Now for the big moment! Rotate your finger counterclockwise until the screw is loosened. There is also a section on problems after replacing the watch battery, such as resetting the digital display or if the watch won't start after the battery has been replaced.
A Tiny Screwdriver And Tweezers Are Both Optional.
This should cause the back plate of the watch to pop off, revealing the battery beneath. Insert your fingernail into the screw slot if the battery is held by a strap. Work the head of a small screwdriver or the edge of a small, dull knife gently into the groove.
With Three Points, You’re Able To Open The Watch More Easily And You’re Less Likely To Damage The Watch Casing In The Process.
Set it aside before taking out the battery. If playback doesn't begin shortly, try restarting your device. If you have a spring bar tool, insert the pronged fork end between the band and where it connects with the watch shoulders.
You Can Press The Bar In From Either End.
If you need to change your watch battery or to replace a watch gasket, straighten the hands and remove dust, or completely replace a watch movement you will need to open the watch to do the work. Check the battery number once the back is off. To adjust your watch band, first put your watch on and squeeze the links together around the clasp to count how many links you need to remove.